Datasheet

LMP8645, LMP8645HV
SNOSB29F –NOVEMBER 2009–REVISED MARCH 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
For input pins +IN, -IN ±5000V
Human Body Model
For all other pins ±2000V
ESD Tolerance
(3)
Machine Model 200V
Charge device model 1250V
Supply Voltage (V
S
= V
+
- V
−
) 13.2V
Differential voltage +IN- (-IN) 6V
Voltage at pins +IN, -IN LMP8645HV -6V to 80V
LMP8645 -6V to 60V
Voltage at R
G
pin 13.2V
Voltage at OUT pin V
-
to V
+
Storage Temperature Range -65°C to 150°C
Junction Temperature
(4)
150°C
For soldering specifications,
http://www.ti.com/lit/SNOA549
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics Tables.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of
JEDEC) Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).
(4) The maximum power dissipation must be derated at elevated temperatures and is dictated by T
J(MAX)
, θ
JA
, and the ambient temperature,
T
A
. The maximum allowable power dissipation P
DMAX
= (T
J(MAX)
- T
A
)/ θ
JA
or the number given in Absolute Maximum Ratings, whichever
is lower.
Operating Ratings
(1)
Supply Voltage (V
S
= V
+
- V
−
) 2.7V to 12V
Temperature Range
(2)
-40°C to 125°C
Package Thermal Resistance
(2)
SOT-6 96°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics Tables.
(2) The maximum power dissipation must be derated at elevated temperatures and is dictated by T
J(MAX)
, θ
JA
, and the ambient temperature,
T
A
. The maximum allowable power dissipation P
DMAX
= (T
J(MAX)
- T
A
)/ θ
JA
or the number given in Absolute Maximum Ratings, whichever
is lower.
2 Submit Documentation Feedback Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: LMP8645 LMP8645HV