Datasheet

www.ti.com
Appendix A Schematic
This schematic shows the evaluation board with a LMP8645 mounted on the PCB. The only difference for
the version of the PCB stuffed with LMP8640 will be the gain resistors RG1, RG2. The LMP8640 is a
current sense with fixed gain, so it doesn't require any external gain resistor.
Figure 2. Schematic Diagram
5
SNOA546C–November 2009–Revised April 2013 Schematic
Submit Documentation Feedback
Copyright © 2009–2013, Texas Instruments Incorporated