Datasheet

LMP7711
SNOSAP4F –SEPTEMBER 2005–REVISED MAY 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS
(1)(2)
ESD Tolerance
(3)
Human Body Model 2000V
Machine Model 200V
Charge-Device Model 1000V
V
IN
Differential ±0.3V
Supply Voltage (V
S
= V
+
– V
−
) 6.0V
Voltage on Input/Output Pins V
+
+0.3V, V
−
−0.3V
Storage Temperature Range −65°C to 150°C
Junction Temperature
(4)
+150°C
Soldering Information Infrared or Convection (20 sec) 235°C
Wave Soldering Lead Temp. (10 sec) 260°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state electrical specifications
under particular test conditions which ensure specific performance limits. This assumes that the device is within the Operating Ratings.
Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication of device
performance.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of
JEDEC) Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).
(4) The maximum power dissipation is a function of T
J(MAX)
, θ
JA
. The maximum allowable power dissipation at any ambient temperature is
P
D
= (T
J(MAX)
- T
A
)/θ
JA
. All numbers apply for packages soldered directly onto a PC Board.
OPERATING RATINGS
(1)
Temperature Range
(2)
−40°C to 125°C
Supply Voltage (V
S
= V
+
– V
−
) 0°C ≤ T
A
≤ 125°C 1.8V to 5.5V
−40°C ≤ T
A
≤ 125°C 2.0V to 5.5V
Package Thermal Resistance (θ
JA
(2)
) 6-Pin SOT 170°C/W
10-Pin VSSOP 236°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state electrical specifications
under particular test conditions which ensure specific performance limits. This assumes that the device is within the Operating Ratings.
Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication of device
performance.
(2) The maximum power dissipation is a function of T
J(MAX)
, θ
JA
. The maximum allowable power dissipation at any ambient temperature is
P
D
= (T
J(MAX)
- T
A
)/θ
JA
. All numbers apply for packages soldered directly onto a PC Board.
2 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LMP7711