Datasheet

L M K 0 4 1 X X - R E V 3 E V A L U A T I O N B O A R D O P E R A T I N G I N S T R U C T I O N S
SNLU099
14
o SYNC* – Set high or low voltage on SYNC* pin. Checked is high voltage.
 If SYNC* is low, then no clock outputs will be observed on divided clock
outputs!
o TRIGGER – Set high or low voltage on pin 10 of uWire header.
Registers Tab
The registers tab shows the value of each register. This is convenient for programming the
device to the desired settings, then recording the hex values for programming in your own
application. By clicking in the “bit field” it is possible to manually change the value of registers
by typing „1‟ and „0.‟