Datasheet

8 SNAU075A LMK3806 Evaluation Board November 2013
Copyright © 2013, Texas Instruments Incorporated
4. Example: Using CodeLoader to Program the LMK03806B
The purpose of this section is to walk the user through using CodeLoader 4 to make some measurements
with the LMK03806B device as an example. For more information on CodeLoader refer to CodeLoader
Usage or the CodeLoader 4 instructions located at http://www.ti.com/tool/codeloader.
Before proceeding, be sure to follow the Quick Start section to ensure proper connections.
1. Start CodeLoader 4 Application
Click “Start”  “Programs”  “CodeLoader 4”  “CodeLoader 4”
The CodeLoader 4 program is installed by default to the CodeLoader 4 application group.
2. Select Device
Click “Select Device”  “Clock Conditioners”  “LMK03806B”
Once started CodeLoader 4 will load the last used device. To load a new device click “Select Device”
from the menu bar, then select the subgroup and finally device to load. For this example, the
LMK03806B is chosen. Selecting the device does cause the device to be programmed.