Datasheet

16 SNAU075A LMK3806 Evaluation Board November 2013
Copyright © 2013, Texas Instruments Incorporated
12. CodeLoader Usage
Code Loader is used to program the evaluation board with either an LPT or USB2ANY-uWire interface
available from http://www.ti.com.
Port Setup Tab
Figure 7: Port Setup Tab
On the Port Setup tab, the user may select the type of communication port (LPT or USB) that will be used
to program the device on the evaluation board.
The Pin Configuration field is hardware dependent and normally does not need to be changed by the user.
Figure 7: Port Setup Tab shows the default settings.