Datasheet

SNAU118
LMK01801BEVAL Evaluation Board Operating Instructions
9
Using CodeLoader to Program the LMK01801
The purpose of this section is to walk the user through using CodeLoader to make some
measurements with the LMK01801 device. For more information on CodeLoader refer to
Appendix A: CodeLoader Usage or the CodeLoader 4 instructions located at
http://www.ti.com/tool/codeloader/
.
Before proceeding, be sure to follow the Quick Start section above to ensure proper connections.
1. Start CodeLoader 4 Application
Click “Start”  “Programs”  “CodeLoader 4”  “CodeLoader 4”
The CodeLoader 4 program is installed by default to the CodeLoader 4 application group.
2. Select Device
Click “Select Device”  “Clock Conditioners”  “LMK01801A1”
Once started CodeLoader 4 will load the last used device. To load a new device click “Select
Device” from the menu bar, then select the subgroup and finally device to load. For this
example, the LMK01800A1 is chosen.
Selecting the device does cause the device to
be programmed. However, it is advisable to
do CTRL-L to ensure programming.
Fi
g
ure 4 – Selectin
g
the LMK01801