Datasheet

SNAU118
LMK01801BEVAL Evaluation Board Operating Instructions
14
Recommended Test Equipment
Power Supply
The Power Supply should be a low noise power supply.
Phase Noise / Spectrum Analyzer
For measuring phase noise an Agilent E5052A Signal Source Analyzer is recommended. An
Agilent E4445A PSA Spectrum Analyzer with the Phase Noise option is also usable although the
architecture of the E5052A is superior for phase noise measurements. At frequencies less than
100 MHz the local oscillator noise of the E4445A is too high and measurements will reflect the
E4445A’s internal local oscillator performance, not the device under test.