Datasheet

LMH6559
www.ti.com SNOSA57C –APRIL 2003–REVISED MARCH 2013
±5V Electrical Characteristics
Unless otherwise specified, all limits ensured for T
J
= 25°C, V
+
= +5V, V
−
= −5V, V
O
= V
CM
= 0V and R
L
= 100Ω to 0V.
Boldface limits apply at the temperature extremes.
Symbol Parameter Conditions Min Typ Max Units
(1) (2) (1)
Frequency Domain Response
SSBW Small Signal Bandwidth V
O
< 0.5V
PP
1750 MHz
GFN Gain Flatness < 0.1dB V
O
< 0.5V
PP
200 MHz
FPBW Full Power Bandwidth (−3dB) V
O
= 2V
PP
(+10dBm) 1050 MHZ
DG Differential Gain R
L
= 150Ω to 0V, 0.06 %
f = 3.58 MHz
DP Differential Phase R
L
= 150Ω to 0V, 0.02 deg
f = 3.58 MHz
Time Domain Response
t
r
Rise Time 3.3V Step (20-80%) 0.4 ns
t
f
Fall Time 0.5 ns
t
s
Settling Time to ±0.1% 3.3V Step 9 ns
OS Overshoot 1V Step 4 %
SR Slew Rate See
(3)
4580 V/µs
Distortion And Noise Performance
HD2 2
nd
Harmonic Distortion V
O
= 2V
PP
, f = 20MHz −58 dBc
HD3 3
rd
Harmonic Distortion V
O
= 2V
PP
, f = 20MHz −53 dBc
THD Total Harmonic Distortion V
O
= 2V
PP
, f = 20MHz −52 dBc
e
n
Input-Referred Voltage Noise f = 1MHz 5.7 nV/√Hz
CP 1dB Compression point f = 10MHz +23 dBm
SNR Signal to Noise Ratio f > 100kHz, BW = 5MHz, 89 dB
V
O
= 350mVrms
(1) All limits are specified by testing or statistical analysis.
(2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary
over time and will also depend on the application and configuration. The typical values are not tested and are not ensured on shipped
production material.
(3) Slew rate is the average of the positive and negative slew rate.
Copyright © 2003–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LMH6559