Datasheet

Configuration www.ti.com
Table 1. Jumper and Header Overview
(1)
(continued)
Jumper
Jumper Function Description
Position
TP4 GND Test Point ground
TP5 GND Test Point ground
TP6 GND Test Point ground
TP7 GND Test Point ground
TP8 V
BAT
Measured at the connector side
TP9 V
BAT
Measured at the DUT side
TP10 V
OUT
Measured at the DUT side
TP11 V
OUT
Measured at the connector side
TP12 CLK1 Clock 1 output Signal
TP13 CLK2 Clock 2 output Signal
TP14 TCXO Supply Oscillator Supply
TP15 GND Test Point ground
TP16 GND Test Point ground
6
AN-2028 LMH2191 Evaluation Board SNAA071A–July 2010–Revised May 2013
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated