Datasheet

LMH0387
SNLS315G APRIL 2010REVISED APRIL 2013
www.ti.com
Output Mode (Cable Driver) AC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified
(1)
.
Symbol Parameter Conditions Reference Min Typ Max Units
DR
MAX
Maximum Input Data Rate SDI, SDI 2970 Mbps
t
jit
Additive Jitter 2.97 Gbps
(2)
BNC_IO 20 ps
P-P
1.485 Gbps
(2)
18 ps
P-P
270 Mbps
(2)
15 ps
P-P
t
r
, t
f
Output Rise Time, Fall Time SD/HD = 0, 20% 80% 65 130 ps
SD/HD = 1, 20% – 80% 400 800 ps
Δt
r
, Δt
f
Mismatch in Rise/Fall Time SD/HD = 0 30 ps
SD/HD = 1 50 ps
Duty Cycle Distortion SD/HD = 0
(3)
30 ps
SD/HD = 1
(3)
100 ps
t
OS
Output Overshoot SD/HD = 0
(3)
10 %
SD/HD = 1
(3)
8 %
RL
OUT
Output Return Loss 5 MHz - 1.5 GHz
(3)(4)
15 dB
1.5 GHz - 3.0 GHz
(3)(4)
10 dB
(1) Typical values are stated for V
CC
= +3.3V and T
A
= +25°C.
(2) Cable driver additive jitter is measured with the input AC coupled.
(3) Specification is ensured by characterization.
(4) Return loss is dependent on board design. The LMH0387 exceeds this specification on the SD387 evaluation board.
Input Mode (Equalizer) SPI Interface AC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified
(1)
.
Symbol Parameter Conditions Reference Min Typ Max Units
Recommended Input Timing Requirements
f
SCK
SCK Frequency SCK 20 MHz
t
PH
SCK Pulse Width High Figure 2, Figure 3 % SCK
40
period
t
PL
SCK Pulse Width Low % SCK
40
period
t
SU
MOSI Setup Time Figure 2, Figure 3 MOSI 4 ns
t
H
MOSI Hold Time 4 ns
t
SSSU
SS Setup Time Figure 2, Figure 3 SS 4 ns
t
SSH
SS Hold Time 4 ns
t
SSOF
SS Off Time 10 ns
Switching Characteristics
t
ODZ
MISO Driven-to-Tristate Time Figure 3 MISO 15 ns
t
OZD
MISO Tristate-to-Driven Time 15 ns
t
OD
MISO Output Delay Time 15 ns
(1) Typical values are stated for V
CC
= +3.3V and T
A
= +25°C.
8 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: LMH0387