Datasheet

LMH0041, LMH0051
LMH0071, LMH0341
SNLS272Q –APRIL 2007–REVISED APRIL 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
Supply Voltage (V
DD3V3
) −0.3V to +4.0V
Supply Voltage(V
DD2V5
) –0.3V to +3.0V
LVCMOS input voltage −0.3V to (V
DD3V3
+0.3V)
LVCMOS output voltage −0.3V to (V
DD3V3
+0.3V)
SMBus I/O Voltage –0.3V to +3.6V
LVDS Input Voltage 0.3V to 3.6V
Junction Temperature +150°C
Storage Temperature −65° to 150°C
Lead Temperature—Soldering 4 seconds +260°C
Thermal Resistance— Junction to Ambient—θ
JA
26°C/W
ESD Rating—Human Body Model, 1.5 KΩ, 100 pF ≥±8KV
(1) “Absolute Maximum Ratings” are the ratings beyond which the safety of the device cannot be ensured. It is not implied that the device
will operate up to these limits.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
Recommended Operating Conditions
Parameter Min Typ Max Units
Supply Voltage (V
DD3V3
-GND) 3.135 3.3 3.465 V
Supply Voltage (V
DD2V5
-GND) 2.375 2.5 2.625 V
Supply noise amplitude (10 Hz to 50 MHz) 100 mV
P-P
Ambient Temperature −40 +25 +85 °C
Case Temperature 102 °C
Input Data Rate LMH0341 270 2970 Mbps
LMH0041 270 1485 Mbps
LMH0071 270 270 Mbps
LMH0051 270 1485 Mbps
LVDS PCB board trace length (mismatch <2%) 25 cm
R
STERM
— SMBus termination resistor value 1000 Ω
Loopthrough Output Driver Pullup Resistor Termination Voltage
(1)
2.5 2.625 V
(1) Maximum termination voltage should be identical to the device supply voltage.
6 Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: LMH0041 LMH0051 LMH0071 LMH0341