Datasheet

LMH0307

www.ti.com

SNLS286I –APRIL 2008–REVISED APRIL 2013

READING A REGISTER

To read a register, the following protocol is used (see SMBus 2.0 specification).

1. The Host drives a START condition, the 7-bit SMBus address, and a “0” indicating a WRITE.

2. The Device (Slave) drives the ACK bit (“0”).

3. The Host drives the 8-bit Register Address.

4. The Device drives an ACK bit (“0”).

5. The Host drives a START condition.

6. The Host drives the 7-bit SMBus Address, and a “1” indicating a READ.

7. The Device drives an ACK bit “0”.

8. The Device drives the 8-bit data value (register contents).

9. The Host drives a NACK bit “1”indicating end of the READ transfer.

10. The Host drives a STOP condition.

Product Folder Links: LMH0307