Datasheet
LMH0302
www.ti.com
SNLS247G –APRIL 2007–REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)
Supply Voltage −0.5V to 3.6V
Input Voltage (all inputs) −0.3V to V
CC
+0.3V
Output Current 28 mA
Storage Temperature Range −65°C to +150°C
Junction Temperature +125°C
Lead Temperature (Soldering 4 Sec) +260°C
Package Thermal Resistance θ
JA
16-pin WQFN +58°C/W
θ
JC
16-pin WQFN +21°C/W
ESD Rating HBM 4.5 kV
MM 250V
CDM 2 kV
(1) "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be ensured. The
stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values.
The table of Electrical Characteristics specifies acceptable device operating conditions.
Recommended Operating Conditions
Supply Voltage (V
CC
– V
EE
) 3.3V ±5%
Operating Free Air Temperature (T
A
) −40°C to +85°C
DC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified
(1) (2)
.
Symbol Parameter Conditions Reference Min Typ Max Units
V
CMIN
Input Common Mode Voltage SDI, SDI 1.1 + V
CC
–
V
V
SDI
/2 V
SDI
/2
V
SDI
Input Voltage Swing Differential 100 2200 mV
P−P
V
CMOUT
Output Common Mode Voltage SDO, SDO V
CC
–
V
V
SDO
V
SDO
Output Voltage Swing Single-ended, 75Ω load,
720 800 880 mV
P-P
R
REF
= 750Ω 1%
V
IH
Input Voltage High Level SD/HD, ENABLE 2.0 V
V
IL
Input Voltage Low Level 0.8 V
I
CC
Supply Current SD/HD = 0,
50 59 mA
SDO/SDO enabled
SD/HD = 0,
26 33 mA
SDO/SDO disabled
SD/HD = 1,
38 48 mA
SDO/SDO enabled
SD/HD = 1,
15 22 mA
SDO/SDO disabled
(1) Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated
referenced to V
EE
= 0 Volts.
(2) Typical values are stated for V
CC
= +3.3V and T
A
= +25°C.
Copyright © 2007–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LMH0302