Datasheet

+
-
191:
9.95k
10k,
0.1%
10k, 0.1%
10k,
0.1%
50:
A2
A1
+
-
V
OUT
= 100V
D
V
CM
- 1/2V
D
10:
Gain
Trim
V
CM
+ 1/2V
D
CMRR
Trim
LMC6462, LMC6464
SNOS725D –MAY 1999–REVISED MARCH 2013 www.ti.com
A small valued potentiometer is used in series with R
G
to set the differential gain of the three op-amp
instrumentation circuit in Figure 48. This combination is used instead of one large valued potentiometer to
increase gain trim accuracy and reduce error due to vibration.
Figure 48. Low Power Three Op-Amp Instrumentation Amplifier
A two op-amp instrumentation amplifier designed for a gain of 100 is shown in Figure 49. Low sensitivity
trimming is made for offset voltage, CMRR and gain. Low cost and low power consumption are the main
advantages of this two op-amp circuit.
Higher frequency and larger common-mode range applications are best facilitated by a three op-amp
instrumentation amplifier.
Figure 49. Low-Power Two-Op-Amp Instrumentation Amplifier
18 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC6462 LMC6464