Datasheet

LMC6032
www.ti.com
SNOS609C NOVEMBER 1994REVISED MARCH 2013
AC Electrical Characteristics
Unless otherwise specified, all limits ensured for T
J
= 25°C. Boldface limits apply at the temperature extremes. V
+
= 5V, V
=
GND = 0V, V
CM
= 1.5V, V
OUT
= 2.5V and R
L
> 1M unless otherwise specified.
Symbol Parameter Conditions Typical LMC6032I Units
(1)
Limit
(2)
SR Slew Rate See
(3)
1.1 0.8 V/μs
0.4 min
GBW Gain-Bandwidth Product 1.4 MHz
φ
M
Phase Margin 50 Deg
G
M
Gain Margin 17 dB
Amp-to-Amp Isolation See
(4)
130 dB
e
n
Input-Referred Voltage Noise F = 1 kHz 22 nV/Hz
i
n
Input-Referred Current Noise F = 1 kHz 0.0002 pA/Hz
F = 10 kHz, A
V
= 10
THD Total Harmonic Distortion R
L
= 2 kΩ, V
O
= 8 V
PP
0.01 %
±5V Supply
(1) Typical values represent the most likely parametric normal.
(2) All limits are specified at room temperature (standard type face) or at operating temperature extremes (bold type face).
(3) V
+
= 15V. Connected as Voltage Follower with 10V step input. Number specified is the slower of the positive and negative slew rates.
(4) Input referred. V
+
= 15V and R
L
= 10 kΩ connected to V
+
/2. Each amp excited in turn with 1 kHz to produce V
O
= 13 V
PP
.
Copyright © 1994–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: LMC6032