Datasheet

LMC6032
SNOS609C NOVEMBER 1994REVISED MARCH 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)
Differential Input Voltage ±Supply Voltage
Supply Voltage (V
+
V
) 16V
Output Short Circuit to V
+
See
(2)
Output Short Circuit to V
See
(3)
Lead Temperature (Soldering, 10 sec.) 260°C
Storage Temperature Range 65°C to +150°C
Junction Temperature 150°C
ESD Tolerance
(4)
1000V
Power Dissipation See
(5)
(V
+
) + 0.3V
Voltage at Output/Input Pin
(V
) 0.3V
Current at Output Pin ±18 mA
Current at Input Pin ±5 mA
Current at Power Supply Pin 35 mA
(1) Absolute Maximum Ratings indicate limits beyond which damage to component may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but do not ensure specific performance limits. For ensured specifications and test
conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed.
(2) Do not connect output to V
+
, when V
+
is greater than 13V or reliability may be adversely affected.
(3) Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature and/or
multiple Op Amp shorts can result in exceeding the maximum allowed junction temperature of 150°C. Output currents in excess of ±30
mA over long term may adversely affect reliability.
(4) Human body model, 100 pF discharged through a 1.5 kΩ resistor.
(5) The maximum power dissipation is a function of T
J(max)
, θ
JA
, and T
A
. The maximum allowable power dissipation at any ambient
temperature is P
D
= (T
J(max)
– T
A
)/θ
JA
.
Operating Ratings
(1)
Temperature Range 40°C T
J
+85°C
Supply Voltage Range 4.75V to 15.5V
Power Dissipation
(2)
8-Pin PDIP 101°C/W
Thermal Resistance (θ
JA
)
(3)
8-Pin SOIC 165°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to component may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but do not ensure specific performance limits. For ensured specifications and test
conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed.
(2) For operating at elevated temperatures the device must be derated based on the thermal resistance θ
JA
with P
D
= (T
J
T
A
)/θ
JA
.
(3) All numbers apply for packages soldered directly into a PC board.
2 Submit Documentation Feedback Copyright © 1994–2013, Texas Instruments Incorporated
Product Folder Links: LMC6032