Datasheet
LMC6032
www.ti.com
SNOS609C –NOVEMBER 1994–REVISED MARCH 2013
TYPICAL SINGLE-SUPPLY APPLICATIONS
(V
+
= 5.0 V
DC
)
Additional single-supply applications ideas can be found in the LM358 datasheet. The LMC6032 is pin-for-pin
compatible with the LM358 and offers greater bandwidth and input resistance over the LM358. These features
will improve the performance of many existing single-supply applications. Note, however, that the supply voltage
range of the LMC6032 is smaller than that of the LM358.
Figure 26. Instrumentation Amplifier
if R1 = R5;
R3 = R6,
and R4 = R7.
= 100 for circuit shown.
For good CMRR over temperature, low drift resistors should be used. Matching of R3 to R6 and R4 to R7 affects
CMRR. Gain may be adjusted through R2. CMRR may be adjusted through R7.
Oscillator frequency is determined by R1, R2, C1, and C2:
f
OSC
= 1/2πRC
where R = R1 = R2 and C = C1 = C2.
Figure 27. Sine-Wave Oscillator
This circuit, as shown, oscillates at 2.0 kHz with a peak-to-peak output swing of 4.0V.
Copyright © 1994–2013, Texas Instruments Incorporated Submit Documentation Feedback 15
Product Folder Links: LMC6032