Datasheet
LMC6001
SNOS694H –MARCH 1995–REVISED MARCH 2013
www.ti.com
Absolute Maximum Ratings
(1)(2)
Differential Input Voltage ±Supply Voltage
Voltage at Input/Output Pin (V
+
) + 0.3V, (V
−
) − 0.3V
Supply Voltage (V
+
− V
−
) −0.3V to +16V
Output Short Circuit to V
+
See
(3)(4)
Output Short Circuit to V
−
See
(3)
(Soldering, 10 Sec.) Lead Temperature 260°C
Storage Temperature −65°C to +150°C
Junction Temperature 150°C
Current at Input Pin ±10 mA
Current at Output Pin ±30 mA
Current at Power Supply Pin 40 mA
Power Dissipation See
(5)
ESD Tolerance
(5)
2 kV
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional but do not ensure specific performance limits. For ensured specifications and test
conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Applies to both single supply and split supply operation. Continuous short circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature of 150°C. Output currents in excess of ±30 mA over long term may adversely
affect reliability.
(4) Do not connect the output to V
+
, when V
+
is greater than 13V or reliability will be adversely affected.
(5) Human body model, 1.5 kΩ in series with 100 pF.
Operating Ratings
(1)
Temperature Range (LMC6001AI, LMC6001BI, LMC6001CI) −40°C ≤ T
J
≤ +85°C
Supply Voltage 4.5V ≤ V
+
≤ 15.5V
Thermal Resistance
(2)
θ
JA
, P Package 100°C/W
θ
JA
, LMC Package 145°C/W
θ
JC
, LMC Package 45°C/W
Power Dissipation See
(3)
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional but do not ensure specific performance limits. For ensured specifications and test
conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed.
(2) All numbers apply for packages soldered directly into a printed circuit board.
(3) For operating at elevated temperatures the device must be derated based on the thermal resistance θ
JA
with P
D
= (T
J
− T
A
)/θ
JA
.
2 Submit Documentation Feedback Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: LMC6001