Datasheet

LMC6001
SNOS694H –MARCH 1995–REVISED MARCH 2013 www.ti.com
Figure 24. Examples of Guard
Ring in PC Board Layout
Figure 25. Inverting Amplifier
Figure 26. Non-Inverting Amplifier
Figure 27. Typical Connections of Guard Rings
The designer should be aware that when it is inappropriate to lay out a PC board for the sake of just a few
circuits, there is another technique which is even better than a guard ring on a PC board: Don't insert the
amplifier's input pin into the board at all, but bend it up in the air and use only air as an insulator. Air is an
excellent insulator. In this case you may have to forego some of the advantages of PC board construction, but
the advantages are sometimes well worth the effort of using point-to-point up-in-the-air wiring. See Figure 28.
10 Submit Documentation Feedback Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: LMC6001