Datasheet

LM96000
SNAS234C –APRIL 2004–REVISED MARCH 2013 www.ti.com
Absolute Maximum Ratings
(1)(2)(3)
Supply Voltage, V+ −0.5V to 6.0V
Voltage on Any Digital Input or −0.5V to 6.0V
Output Pin
Voltage on 12V Analog Input −0.5V to 16V
Voltage on 5V Analog Input −0.5V to 6.66V
Voltage on Remote1+, Remote2+, −0.5V to (V+ + 0.05V)
Current on Remote1−, Remote2− ±1 mA
Voltage on Other Analog Inputs −0.5V to 6.0V
Input Current on Any Pin
(4)
±5 mA
Package Input Current
(4)
±20 mA
Package Dissipation at T
A
= 25°C See
(5)
ESD Susceptibility
(6)
Human Body Model 2500V
Machine Model 250V
Storage Temperature −65°C to +150°C
Soldering process must comply with reflow temperature profile specifications. See www.ti.com/packaging
(7)
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
(2) All voltages are measured with respect to GND, unless otherwise noted.
(3) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(4) When the input voltage (V
IN
) at any pin exceeds the power supplies (V
IN
< GND or V
IN
>V+ ), the current at that pin should be limited to
5mA. The 20mA maximum package input current rating limits the number of pins that can safely exceed the power supplies with an
input current of 5mA to four. Parasitic components and/or ESD protection circuitry are shown below for the LM96000's pins. The nominal
breakdown voltage the zener is 6.5V. Care should be taken not to forward bias the parasitic diode D1 present on pins D+ and D−. Doing
so by more that 50 mV may corrupt temperature measurements. SNP stands for snap-back device.
(5) Thermal resistance junction-to-ambient when attached to a double-sided printed circuit board with 1 oz. foil is 113 °C/W.
(6) Human body model, 100pF discharged through a 1.5kΩ resistor. Machine model, 200pF discharged directly into each pin.
(7) Reflow temperature profiles are different for packages containing lead (Pb) than for those that do not.
Operating Ratings
(1)(2)
LM96000 Operating Temperature Range 0°C ≤ T
A
≤ +85°C
Remote Diode Temperature Range 0°C ≤ T
D
≤ +125°C
Supply Voltage (3.3V nominal) +3.0V to +3.6V
V
IN
Voltage Range
+12V V
IN
−0.05V to 16V
+5V V
IN
−0.05V to 6.66V
+3.3V V
IN
3.0V to 4.4V
VCCP_IN and All Other Inputs −0.05V to (V+ + 0.05V)
VID0–VID4 −0.05V to 5.5V
Typical Supply Current 0.53 mA
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
(2) All voltages are measured with respect to GND, unless otherwise noted.
4 Submit Documentation Feedback Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LM96000