Datasheet

0.25 V per Division
250 ns per Division
Maximum capacitance
before oscillation = 380 pF
250 ns per Division
0.25 V per Division
Maximum capacitance
before oscillation = 560 pF
250 ns per Division
0.25 V per Division
Maximum capacitance
before oscillation = 590 pF
250 ns per Division
0.25 V per Division
250 ns per Division
0.25 V per Division
250 ns per Division
0.25 V per Division
5 V
–5 V
15 V
–15 V
R
O
V
O
R = 2 k
L
Ω
C
L
LM833
www.ti.com SLOS481A –JULY 2010–REVISED AUGUST 2010
APPLICATION INFORMATION
Output Characteristics
All operating characteristics are specified with 100-pF load capacitance. The LM833 can drive higher capacitance
loads. However, as the load capacitance increases, the resulting response pole occurs at lower frequencies,
causing ringing, peaking, or oscillation. The value of the load capacitance at which oscillation occurs varies from
lot to lot. If an application appears to be sensitive to oscillation due to load capacitance, adding a small
resistance in series with the load should alleviate the problem (see Figure 2).
PULSE RESPONSE PULSE RESPONSE PULSE RESPONSE
(R
L
= 600 Ω, C
L
= 380 pF) (R
L
= 2 kΩ, C
L
= 560 pF) (R
L
= 10 kΩ, C
L
= 590 pF)
PULSE RESPONSE PULSE RESPONSE PULSE RESPONSE
(R
O
= 0 Ω, C
O
= 1000 pF, R
L
= 2 kΩ) (R
O
= 4 Ω, C
O
= 1000 pF, R
L
= 2 kΩ) (R
O
= 35 Ω, C
O
= 1000 pF, R
L
= 2 kΩ)
Figure 2. Output Characteristics
Copyright © 2010, Texas Instruments Incorporated Submit Documentation Feedback 15
Product Folder Link(s): LM833