Datasheet

www.ti.com

LM8335 GUI

5 LM8335 GUI

The LM8335EVM GUI will initially start with all access disabled with the exception of the Open button

(refer to Figure 3). Clicking this button will initialize the USB interface between the PC and the

LM8335EVM. When the USB connection is successfully opened the Serial: and Firmware Revision: fields

will be populated with the LM8335EVM values (refer to Figure 4). If the LM8335EVM is not recognized by

the PC the Serial: and Firmware Revision: fields will be populated with the word Error (refer to Figure 5).

Figure 3. LM8335EVM GUI Initial Screen

SNVU189A–October 2012–Revised May 2013 AN-2298 LM8335 Evaluation Module (EVM)

Submit Documentation Feedback