Datasheet

LM613
www.ti.com SNOSC11B –AUGUST 2000–REVISED MARCH 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
See
(3)
36V (Max)
Voltage on Any Pin Except V
R
(referred to V
−
pin)
See
(4)
−0.3V (Min)
Current through Any Input Pin & V
R
Pin ±20 mA
Military and Industrial ±36V
Differential Input Voltage
Commercial ±32V
Storage Temperature Range −65°C ≤ T
J
≤ +150°C
Maximum Junction Temperature
(5)
150°C
N Package 100°C/W
Thermal Resistance, Junction-to-Ambient
(6)
DW0016B Package 150°C/W
N Package 260°C
Soldering Information (10 Sec.)
DW0016B Package 220°C
ESD Tolerance
(7)
±1 kV
(1) Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply
when operating the device beyond its rated operating conditions.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Input voltage above V
+
is allowed. As long as one input pin voltage remains inside the common-mode range, the comparator will deliver
the correct output.
(4) More accurately, it is excessive current flow, with resulting excess heating, that limits the voltages on all pins. When any pin is pulled a
diode drop below V
−
, a parasitic NPN transistor turns ON. No latch-up will occur as long as the current through that pin remains below
the Maximum Rating. Operation is undefined and unpredictable when any parasitic diode or transistor is conducting.
(5) Simultaneous short-circuit of multiple comparators while using high supply voltages may force junction temperature above maximum,
and thus should not be continuous.
(6) Junction temperature may be calculated using T
J
= T
A
+ P
D
θ
JA
.The given thermal resistance is worst-case for packages in sockets in
still air. For packages soldered to copper-clad board with dissipation from one comparator or reference output transistor, nominal θJA is
90°C/W for the N package, and 135°C/W for the DW0016B package.
(7) Human body model, 100 pF discharged through a 1.5 kΩ resistor.
Operating Temperature Range
LM613AI, LM613BI −40°C to +85°C
LM613AM, LM613M −55°C to +125°C
LM613C 0°C ≤ T
J
≤ +70°C
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LM613