Datasheet

LM6132
www.ti.com SNOS751D –APRIL 2000–REVISED FEBRUARY 2013
Figure 34.
Figure 35.
Figure 36 shows a method for compensating for load capacitance (C
O
) effects by adding both an isolation
resistor R
O
at the output and a feedback capacitor C
F
directly between the output and the inverting input pin.
Feedback capacitor C
F
compensates for the pole introduced by R
O
and C
O
, minimizing ringing in the output
waveform while the feedback resistor R
F
compensates for dc inaccuracies introduced by R
O
. Depending on the
size of the load capacitance, the value of R
O
is typically chosen to be between 100Ω to 1 kΩ.
Figure 36.
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 13
Product Folder Links: LM6132