Datasheet

LM5060
www.ti.com SNVS628F –OCTOBER 2009–REVISED APRIL 2013
Absolute Maximum Ratings
(1)(2)
V
IN
to GND
(3)(4)
-0.3V to 75V
SENSE, OUT to GND
(5)
-0.3V to 75V
GATE to GND
(3)(5)
-0.3V to 75V
EN, UVLO to GND
(4)
-0.3V to 75V
nPGD, OVP to GND -0.3V to 75V
TIMER to GND -0.3V to 7V
ESD Rating, HBM
(6)
2 kV
Storage Temperature −65°C to + 150°C
Peak Reflow Temperature
(7)
260°C
Junction Temperature 150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including in-operability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. Operating Range conditions indicate
the conditions at which the device is functional and the device should not be operated beyond such conditions. For ensured
specifications and conditions, see the Electrical Characteristics table.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) The GATE pin voltage is typically 12V above the VIN pin when the LM5060 is enabled. Therefore, the Absolute Maximum Rating for VIN
(75V) applies only when the LM5060 is disabled, or for a momentary surge to that voltage since the Absolute Maximum Rating for the
GATE pin is also 75V.
(4) The minimum voltage of -1V is allowed if the current is limited to below -25 mA. Also it is assumed that the negative voltage on the pins
only occur during reverse battery condition when a positive supply voltage (Vin) is not applied.
(5) The minimum voltage of -25V is allowed if the current is limited to below -25 mA. Also it is assumed that the negative voltage on the
pins only occur during reverse battery condition when a positive supply voltage (VIN) is not applied.
(6) The Human Body Model (HBM) is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin. Applicable standard is JESD-
22–A114–C.
(7) Soldering process must comply with Texas Instruments' Reflow Temperature Profile specifications. Reflow temperature profiles are
different for lead-free and non-lead-free packages. Refer to the Packaging Data Book available from Texas Instruments, or :
www.ti.com/packaging
Operating Ratings
(1)
VIN Supply Voltage 5.5V to 65V
EN Voltage 0.0V to 65V
UVLO Voltage 0.0V to 65V
nPGD Off Voltage 0V to 65V
nPGD Sink Current 0mA to 5mA
Junction Temperature Range −40°C to + 125°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including in-operability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. Operating Range conditions indicate
the conditions at which the device is functional and the device should not be operated beyond such conditions. For ensured
specifications and conditions, see the Electrical Characteristics table.
Copyright © 2009–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LM5060