Datasheet
LM5007
SNVS252F –SEPTEMBER 2003–REVISED MARCH 2013
www.ti.com
Electrical Characteristics
Specifications with standard typeface are for T
J
= 25°C, and those with boldface type apply over full Operating Junction
Temperature range. V
IN
= 48V, unless otherwise stated
(1)
.
Symbol Parameter Conditions Min Typ Max Unit
Startup Regulator
V
CC
V
CC
Regulator Output 6.6 7 7.4 V
Reg
V
CC
Current Limit
(2)
11 mA
V
CC
Supply
V
CC
undervoltage Lockout Voltage 6.3 V
(V
CC
increasing)
V
CC
Undervoltage Hysteresis 206 mV
V
CC
UVLO Delay (filter) 3 µs
Operating Current (ICC) Non-Switching, FB = 3V 500 675 µA
Shutdown/Standby Current R
ON
= 0V 100 200 µA
Switch Characteristics
Buck Switch Rds(on) I
TEST
= 200mA, 0.74 1.34 Ω
VBST −VSW = 6.3V
(3)
Gate Drive UVLO (VBST – VSW) Rising 3.4 4.5 5.5 V
Gate Drive UVLO Hysteresis 400 mV
Breakdown Voltage, T
J
= 25°C 80 V
V
IN
to Ground
T
J
= -40°C to +125°C 76 V
Breakdown Voltage, T
J
= 25°C 80 V
BST to V
CC
T
J
= -40°C to +125°C 76 V
Current Limit
Current Limit Threshold 535 725 900 mA
Current Limit Response Time I
switch
Overdrive = 0.1A Time to Switch Off 225 ns
OFF time generator (test 1) FB=0V, RCL = 100K 17 µs
OFF time generator (test 2) FB=2.3V, RCL = 100K 2.65 µs
On Time Generator
TON -1 Vin = 10V, Ron = 200K 2.15 2.77 3.5 µs
TON -2 Vin = 75V, Ron = 200K 290 390 490 ns
Remote Shutdown Threshold Rising 0.45 0.7 1.1 V
Remote Shutdown Hysteresis 40 mV
Minimum Off Time
Minimum Off Timer FB = 0V 300 ns
Regulation and OV Comparators
FB Reference Threshold Internal reference, Trip point for switch ON 2.445 2.5 2.550 V
FB Over-Voltage Threshold Trip point for switch OFF 2.875 V
FB Bias Current 100 nA
Thermal Shutdown
Tsd Thermal Shutdown Temp. 165 °C
Thermal Shutdown Hysteresis 25 °C
Thermal Resistance
θ
JA
Junction to Ambient VSSOP-8 Package 200 °C/W
WSON-8 Package 40 °C/W
(1) All electrical characteristics having room temperature limits are tested during production with T
A
= T
J
= 25°C. All hot and cold limits are
specified by correlating the electrical characteristics to process and temperature variations and applying statistical process control.
(2) The V
CC
output is intended as a self bias for the internal gate drive power and control circuits. Device thermal limitations limit external
loading.
(3) For devices in the WSON-8 package, the Rds(on) limits are specified by design characterization data only.
4 Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LM5007