Datasheet

LM4910
SNAS151G –MAY 2004–REVISED MARCH 2007 www.ti.com
Figure 22. Top Layer
Figure 23. Bottom Layer
LM4910 Reference Design Boards Bill of Materials
Part Description Qty Ref Designator
LM4910 Mono Reference Design Board 1
LM4910 Audio AMP 1 U1
Tantalum Cap 1µF 16V 10 1 Cs
Ceramic Cap 0.39µF 50V Z50 20 2 Ci
Resistor 20kΩ 1/10W 5 4 Ri, Rf
Resistor 100kΩ 1/10W 5 1 Rpu
Jumper Header Vertical Mount 2X1, 0.100 1 J1
PCB LAYOUT GUIDELINES
This section provides practical guidelines for mixed signal PCB layout that involves various digital/analog power
and ground traces. Designers should note that these are only "rule-of-thumb" recommendations and the actual
results will depend heavily on the final layout.
22 Submit Documentation Feedback Copyright © 2004–2007, Texas Instruments Incorporated
Product Folder Links: LM4910