Datasheet

LM4881
www.ti.com SNAS001D –SEPTEMBER 1997–REVISED MAY 2013
Absolute Maximum Ratings
(1)(2)
Supply Voltage 6.0V
Storage Temperature −65°C to +150°C
Input Voltage −0.3V to V
DD
+ 0.3V
Power Dissipation
(3)
Internally limited
ESD Susceptibility
(4)
2000V
ESD Susceptibility
(5)
200V
Junction Temperature 150°C
Soldering Information Small Outline Package Vapor Phase (60 seconds) 215°C
Infrared (15 seconds) 220°C
Thermal Resistance θ
JC
(VSSOP) 56°C/W
θ
JA
(VSSOP) 210°C/W
θ
JC
(SOIC) 35°C/W
θ
JA
(SOIC) 170°C/W
θ
JC
(PDIP) 37°C/W
θ
JA
(PDIP) 107°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state DC and AC electrical
specifications under particular test conditions which ensure specific performance limits. This assumes that the device is within the
Operating Ratings. Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication
of device performance.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) The maximum power dissipation must be derated at elevated temperatures and is dictated by T
JMAX
, θ
JA
, and the ambient temperature
T
A
. The maximum allowable power dissipation is P
DMAX
= (T
JMAX
− T
A
) / θ
JA
. For the LM4881, T
JMAX
= 150°C, and the typical junction-
to-ambient thermal resistance, when board mounted, is 210°C/W for the VSSOP Package and 107°C/W for package P0008E.
(4) Human body model, 100 pF discharged through a 1.5 kΩ resistor.
(5) Machine Model, 220 pF–240 pF discharged through all pins.
Operating Ratings
Temperature Range T
MIN
≤ T
A
≤ T
MAX
−40°C ≤ T
A
≤ 85°C
Supply Voltage 2.7V ≤ V
DD
≤ 5.5V
Electrical Characteristics
(1)(2)
The following specifications apply for V
DD
= 5V unless otherwise specified. Limits apply for T
A
= 25C.
Symbol Parameter Conditions LM4881 Units
(Limits)
Typ
(3)
Limit
(4)
V
DD
Power Supply Voltage 2.7 V (min)
5.5 V (max)
I
DD
Quiescent Current V
IN
= 0V, I
O
= 0A 3.6 6.0 mA (max)
I
SD
Shutdown Current V
PIN1
= V
DD
0.7 5 µA (max)
V
OS
Offset Voltage V
IN
= 0V 5 50 mV (max)
(1) All voltages are measured with respect to the ground pin, unless otherwise specified.
(2) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state DC and AC electrical
specifications under particular test conditions which ensure specific performance limits. This assumes that the device is within the
Operating Ratings. Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication
of device performance.
(3) Typicals are measured at 25°C and represent the parametric norm.
(4) Limits are specified to TI's AOQL (Average Outgoing Quality Level).
Copyright © 1997–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LM4881