Datasheet
LM4880
SNAS103C –NOVEMBER 1995–REVISED MAY 2013
www.ti.com
Typical Application
*Refer to Application Information for information concerning proper selection of the input and output coupling
capacitors.
Figure 2. Typical Audio Amplifier Application Circuit
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
Supply Voltage 6.0V
Storage Temperature −65°C to +150°C
Input Voltage −0.3V to V
DD
+ 0.3V
Power Dissipation
(3)
Internally limited
ESD Susceptibility
(4)
2000V
ESD Susceptibility
(5)
200V
Junction Temperature 150°C
Soldering Information Small Outline Package Vapor Phase (60 sec.) 215°C
Infrared (15 sec.) 220°C
Thermal Resistance θ
JC
(PDIP) 37°C/W
θ
JA
(PDIP) 107°C/W
θ
JC
(SOIC) 35°C/W
θ
JA
(SOIC) 170°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage may occur. Operating Ratings indicate conditions for which the device
is functional, but do not specify specific performance limits. Electrical Characteristics state DC and AC electrical specifications under
particular test conditions which ensure specific performance limits. This assumes that the device is within the Operating Ratings.
Specifications are not specified for parameters where no limit is given, however, the typical value is a good indication of device
performance.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) The maximum power dissipation must be derated at elevated temperatures and is dictated by T
JMAX
, θ
JA
, and the ambient temperature
T
A
. The maximum allowable power dissipation is P
DMAX
= (T
JMAX
− T
A
)/θ
JA
or the number given in the Absolute Maximum Ratings,
whichever is lower. For the LM4880, T
JMAX
= 150°C, and the typical junction-to-ambient thermal resistance is 170°C/W for package
D0008A and 107°C/W for package P0008E.
(4) Human body model, 100 pF discharged through a 1.5 kΩ resistor.
(5) Machine model, 220 pF–240 pF discharged through all pins.
2 Submit Documentation Feedback Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: LM4880