Datasheet

LM4864
www.ti.com SNAS109F –SEPTEMBER 1999–REVISED MAY 2013
The high frequency pole is determined by the product of the desired high frequency pole, f
H
, and the differential
gain, A
VD
. With a A
VD
= 2 and f
H
= 100 kHz, the resulting GBWP = 100 kHz which is much smaller than the
LM4864 GBWP of 18 MHz. This figure displays that if a designer has a need to design an amplifier with a higher
differential gain, the LM4864 can still be used without running into bandwidth problems.
LM4864LD DEMO BOARD ARTWORK
Figure 35. Silk Screen View of LM4864LD Figure 36. Top Layer of LM4864LD
Figure 37. Bottom Layer of LM4864LD
Copyright © 1999–2013, Texas Instruments Incorporated Submit Documentation Feedback 15
Product Folder Links: LM4864