Datasheet

LM4860
SNAS096C –AUGUST 1994–REVISED MAY 2013 www.ti.com
High Gain Application Circuit
Figure 3. Stereo Amplifier with A
VD
= 20
Single Ended Application Circuit
*C
S
and C
B
size depend on specific application requirements and constraints. Typical values of C
S
and C
B
are 0.1 μF.
**Pin 2, 6, or 7 should be connected to V
DD
to disable the amplifier or to GND to enable the amplifier. These pins
should not be left floating.
***These components create a “dummy” load for pin 8 for stability purposes.
Figure 4. Single-Ended Amplifier with A
V
= −1
4 Submit Documentation Feedback Copyright © 1994–2013, Texas Instruments Incorporated
Product Folder Links: LM4860