Datasheet

Table 21-7. Signals by Function, Except for GPIO (continued)
DescriptionBuffer Type
a
Pin TypePin NumberPin NameFunction
An open-drain output with internal pull-up that
indicates the processor is in Hibernate mode.
ODOM12HIB
Hibernate
Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
Power-L12VBAT
An external input that brings the processor out of
Hibernate mode when asserted.
TTLIM10WAKE
Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a crystal or a 32.768-kHz oscillator for the
Hibernation module RTC.
AnalogIK11XOSC0
Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
AnalogOK12XOSC1
I
2
C module 0 clock.ODI/OC11I2C0SCL
I2C
I
2
C module 0 data.ODI/OC12I2C0SDA
JTAG/SWD CLK.TTLIA9SWCLK
JTAG/SWD/SWO
JTAG TMS and SWDIO.TTLI/OB9SWDIO
JTAG TDO and SWO.TTLOA10SWO
JTAG/SWD CLK.TTLIA9TCK
JTAG TDI.TTLIB8TDI
JTAG TDO and SWO.TTLOA10TDO
JTAG TMS and SWDIO.TTLI/OB9TMS
JTAG TRST.TTLIA8TRST
PWM Fault.TTLIF2Fault
PWM
PWM 0. This signal is controlled by PWM Generator
0.
TTLOM9PWM0
PWM 1. This signal is controlled by PWM Generator
0.
TTLOK2PWM1
PWM 2. This signal is controlled by PWM Generator
1.
TTLOE12PWM2
PWM 3. This signal is controlled by PWM Generator
1.
TTLOD12PWM3
PWM 4. This signal is controlled by PWM Generator
2.
TTLOA11PWM4
PWM 5. This signal is controlled by PWM Generator
2.
TTLOB12PWM5
741June 18, 2012
Texas Instruments-Production Data
Stellaris
®
LM3S8962 Microcontroller
NRND: Not recommended for new designs.