Datasheet

Table 21-6. Signals by Signal Name (continued)
DescriptionBuffer Type
a
Pin TypePin NumberPin Name
Low drop-out regulator output voltage. This pin requires an
external capacitor between the pin and GND of 1 µF or
greater. The LDO pin must also be connected to the VDD25
pins at the board level in addition to the decoupling
capacitor(s).
Power-E3LDO
Ethernet LED 0.TTLOJ12LED0
Ethernet LED 1.TTLOJ11LED1
MDIO of the Ethernet PHY.TTLI/OL9MDIO
No connect. Leave the pin electrically unconnected/isolated.--A2
A3
A4
B4
C1
C2
D1
D2
NC
Main oscillator crystal input or an external clock reference
input.
AnalogIL11OSC0
Main oscillator crystal output. Leave unconnected when using
a single-ended clock source.
AnalogOM11OSC1
GPIO port A bit 0.TTLI/OL3PA0
GPIO port A bit 1.TTLI/OM3PA1
GPIO port A bit 2.TTLI/OM4PA2
GPIO port A bit 3.TTLI/OL4PA3
GPIO port A bit 4.TTLI/OL5PA4
GPIO port A bit 5.TTLI/OM5PA5
GPIO port A bit 6.TTLI/OL6PA6
GPIO port A bit 7.TTLI/OM6PA7
GPIO port B bit 0.TTLI/OE12PB0
GPIO port B bit 1.TTLI/OD12PB1
GPIO port B bit 2.TTLI/OC11PB2
GPIO port B bit 3.TTLI/OC12PB3
GPIO port B bit 4.TTLI/OA6PB4
GPIO port B bit 5.TTLI/OB7PB5
GPIO port B bit 6.TTLI/OA7PB6
GPIO port B bit 7.TTLI/OA8PB7
GPIO port C bit 0.TTLI/OA9PC0
GPIO port C bit 1.TTLI/OB9PC1
GPIO port C bit 2.TTLI/OB8PC2
GPIO port C bit 3.TTLI/OA10PC3
GPIO port C bit 4.TTLI/OL1PC4
GPIO port C bit 5.TTLI/OM1PC5
GPIO port C bit 6.TTLI/OM2PC6
GPIO port C bit 7.TTLI/OL2PC7
GPIO port D bit 0.TTLI/OG1PD0
737June 18, 2012
Texas Instruments-Production Data
Stellaris
®
LM3S8962 Microcontroller
NRND: Not recommended for new designs.