Datasheet

The mask information provided in this register accompanies the data (CANIFnDAn), arbitration

information (CANIFnARBn), and control information (CANIFnMCTL) to the message object in the

message RAM. The mask is used with the ID bit in the CANIFnARBn register for acceptance

filtering. Additional mask information is contained in the CANIFnMSK2 register.

CAN IF1 Mask 1 (CANIF1MSK1)

CAN0 base: 0x4004.0000

Offset 0x028

Type R/W, reset 0x0000.FFFF

16171819202122232425262728293031

reserved

ROROROROROROROROROROROROROROROROType

0000000000000000Reset

0123456789101112131415

MSK

R/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WType

1111111111111111Reset

DescriptionResetTypeNameBit/Field

Software should not rely on the value of a reserved bit. To provide

compatibility with future products, the value of a reserved bit should be

preserved across a read-modify-write operation.

0x0000ROreserved31:16

Identifier Mask

When using a 29-bit identifier, these bits are used for bits [15:0] of the

ID. The MSK field in the CANIFnMSK2 register are used for bits [28:16]

of the ID. When using an 11-bit identifier, these bits are ignored.

0: The corresponding identifier field (ID) in the message object cannot

inhibit the match in acceptance filtering.

1: The corresponding identifier field (ID) is used for acceptance filtering.

0xFFFFR/WMSK15:0

June 18, 2012586

Texas Instruments-Production Data

Controller Area Network (CAN) Module

NRND: Not recommended for new designs.