Datasheet

DescriptionResetTypeNameBit/Field
Status Interrupt Enable
0: Disabled. No status interrupt is generated.
1: Enabled. An interrupt is generated when a message has successfully
been transmitted or received, or a CAN bus error has been detected. A
change in the TXOK, RXOK or LEC bits in the CANSTS register generates
an interrupt.
0R/WSIE2
CAN Interrupt Enable
0: Interrupts disabled.
1: Interrupts enabled.
0R/WIE1
Initialization
0: Normal operation.
1: Initialization started.
1R/WINIT0
June 18, 2012574
Texas Instruments-Production Data
Controller Area Network (CAN) Module
NRND: Not recommended for new designs.