Datasheet

DescriptionResetTypeNameBit/Field
SSI Synchronous Serial Port Enable
Setting this bit enables SSI operation.
The SSE values are defined as follows:
DescriptionValue
SSI operation disabled.0
SSI operation enabled.1
Note: This bit must be set to 0 before any control registers
are reprogrammed.
0R/WSSE1
SSI Loopback Mode
Setting this bit enables Loopback Test mode.
The LBM values are defined as follows:
DescriptionValue
Normal serial port operation enabled.0
Output of the transmit serial shift register is connected internally
to the input of the receive serial shift register.
1
0R/WLBM0
June 18, 2012492
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
NRND: Not recommended for new designs.