Datasheet

DescriptionResetTypeNameBit/Field
UART Parity Error
This bit is set to 1 when the parity of the received data character does
not match the parity defined by bits 2 and 7 of the UARTLCRH register.
This bit is cleared to 0 by a write to UARTECR.
0ROPE1
UART Framing Error
This bit is set to 1 when the received character does not have a valid
stop bit (a valid stop bit is 1).
This bit is cleared to 0 by a write to UARTECR.
In FIFO mode, this error is associated with the character at the top of
the FIFO.
0ROFE0
Writes
UART Receive Status/Error Clear (UARTRSR/UARTECR)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
Offset 0x004
Type WO, reset 0x0000.0000
16171819202122232425262728293031
reserved
WOWOWOWOWOWOWOWOWOWOWOWOWOWOWOWOType
0000000000000000Reset
0123456789101112131415
DATAreserved
WOWOWOWOWOWOWOWOWOWOWOWOWOWOWOWOType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0WOreserved31:8
Error Clear
A write to this register of any data clears the framing, parity, break, and
overrun flags.
0WODATA7:0
June 18, 2012446
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
NRND: Not recommended for new designs.