Datasheet

DescriptionResetTypeNameBit/Field
UART Parity Error
This bit is set to 1 when the parity of the received data character does
not match the parity defined by bits 2 and 7 of the UARTLCRH register.
In FIFO mode, this error is associated with the character at the top of
the FIFO.
0ROPE9
UART Framing Error
This bit is set to 1 when the received character does not have a valid
stop bit (a valid stop bit is 1).
0ROFE8
Data Transmitted or Received
When written, the data that is to be transmitted via the UART. When
read, the data that was received by the UART.
0R/WDATA7:0
June 18, 2012444
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
NRND: Not recommended for new designs.