Datasheet

Register 8: GPTM Interrupt Clear (GPTMICR), offset 0x024
This register is used to clear the status bits in the GPTMRIS and GPTMMIS registers. Writing a 1
to a bit clears the corresponding bit in the GPTMRIS and GPTMMIS registers.
GPTM Interrupt Clear (GPTMICR)
Timer0 base: 0x4003.0000
Timer1 base: 0x4003.1000
Timer2 base: 0x4003.2000
Timer3 base: 0x4003.3000
Offset 0x024
Type W1C, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
TATOCINT
CAMCINTCAECINTRTCCINTreserved
TBTOCINT
CBMCINTCBECINTreserved
W1CW1CW1CW1CROROROROW1CW1CW1CROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x00ROreserved31:11
GPTM CaptureB Event Interrupt Clear
The CBECINT values are defined as follows:
DescriptionValue
The interrupt is unaffected.0
The interrupt is cleared.1
0W1CCBECINT10
GPTM CaptureB Match Interrupt Clear
The CBMCINT values are defined as follows:
DescriptionValue
The interrupt is unaffected.0
The interrupt is cleared.1
0W1CCBMCINT9
GPTM TimerB Time-Out Interrupt Clear
The TBTOCINT values are defined as follows:
DescriptionValue
The interrupt is unaffected.0
The interrupt is cleared.1
0W1CTBTOCINT8
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x0ROreserved7:4
361June 18, 2012
Texas Instruments-Production Data
Stellaris
®
LM3S8962 Microcontroller
NRND: Not recommended for new designs.