Datasheet

Revision History
The revision history table notes changes made between the indicated revisions of the LM3S8962
data sheet.
Table 1. Revision History
DescriptionRevisionDate
■ Corrected missing interrupt 9 in "Interrupts" table.
■ Minor data sheet clarifications and corrections.
12746.2515June 2012
■ Added module-specific pin tables to each chapter in the new Signal Description sections.
■ In Hibernation chapter:
– Changed terminology from non-volatile memory to battery-backed memory.
– Clarified Hibernation module register reset conditions.
■ In Timer chapter, clarified that in 16-Bit Input Edge Time Mode, the timer is capable of capturing
three types of events: rising edge, falling edge, or both.
■ In UART chapter, clarified interrupt behavior.
■ In SSI chapter, corrected SSIClk in the figure "Synchronous Serial Frame Format (Single Transfer)".
■ In Signal Tables chapter:
– Corrected pin numbers in table "Connections for Unused Signals" (other pin tables were correct).
– Corrected buffer type for PWMn signals in pin tables.
■ In Electrical Characteristics chapter:
– Added parameter "Input voltage for a GPIO configured as an analog input" to the "Maximum
Ratings" table.
– Corrected Nom values for parameters "TCK clock Low time" and "TCK clock High time" in "JTAG
Characteristics" table.
– Corrected missing values for "Conversion time" and "Conversion rate" parameters in "ADC
Characteristics" table.
■ Additional minor data sheet clarifications and corrections.
11108November 2011
27June 18, 2012
Texas Instruments-Production Data
Stellaris
®
LM3S8962 Microcontroller
NRND: Not recommended for new designs.