Datasheet

Register 28: Software Reset Control 1 (SRCR1), offset 0x044
Writes to this register are masked by the bits in the Device Capabilities 2 (DC2) register.
Software Reset Control 1 (SRCR1)
Base 0x400F.E000
Offset 0x044
Type R/W, reset 0x00000000
16171819202122232425262728293031
TIMER0TIMER1TIMER2TIMER3reservedCOMP0reserved
R/WR/WR/WR/WROROROROR/WROROROROROROROType
0000000000000000Reset
0123456789101112131415
UART0UART1reservedSSI0reservedQEI0QEI1reservedI2C0reserved
R/WR/WROROR/WROROROR/WR/WROROR/WROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:25
Analog Comp 0 Reset Control
Reset control for analog comparator 0.
0R/WCOMP024
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved23:20
Timer 3 Reset Control
Reset control for General-Purpose Timer module 3.
0R/WTIMER319
Timer 2 Reset Control
Reset control for General-Purpose Timer module 2.
0R/WTIMER218
Timer 1 Reset Control
Reset control for General-Purpose Timer module 1.
0R/WTIMER117
Timer 0 Reset Control
Reset control for General-Purpose Timer module 0.
0R/WTIMER016
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved15:13
I2C0 Reset Control
Reset control for I2C unit 0.
0R/WI2C012
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved11:10
QEI1 Reset Control
Reset control for QEI unit 1.
0R/WQEI19
239June 18, 2012
Texas Instruments-Production Data
Stellaris
®
LM3S8962 Microcontroller
NRND: Not recommended for new designs.