Datasheet
Register 17: Device Capabilities 4 (DC4), offset 0x01C
This register provides a list of features available in the system. The Stellaris family uses this register
format to indicate the availability of the following family features in the specific device: Ethernet MAC
and PHY, GPIOs, and CCP I/Os. The format of this register is consistent with the RCGC2, SCGC2,
and DCGC2 clock control registers and the SRCR2 software reset control register.
Device Capabilities 4 (DC4)
Base 0x400F.E000
Offset 0x01C
Type RO, reset 0x5100.007F
16171819202122232425262728293031
reservedE1588reservedEMAC0
reserved
EPHY0
reserved
ROROROROROROROROROROROROROROROROType
0000000010001010Reset
0123456789101112131415
GPIOAGPIOBGPIOCGPIODGPIOEGPIOFGPIOGreserved
ROROROROROROROROROROROROROROROROType
1111111000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31
Ethernet PHY0 Present
When set, indicates that Ethernet PHY module 0 is present.
1ROEPHY030
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved29
Ethernet MAC0 Present
When set, indicates that Ethernet MAC module 0 is present.
1ROEMAC028
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved27:25
1588 Capable
When set, indicates that that EMAC0 is 1588-capable.
1ROE158824
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved23:7
GPIO Port G Present
When set, indicates that GPIO Port G is present.
1ROGPIOG6
GPIO Port F Present
When set, indicates that GPIO Port F is present.
1ROGPIOF5
GPIO Port E Present
When set, indicates that GPIO Port E is present.
1ROGPIOE4
215June 18, 2012
Texas Instruments-Production Data
Stellaris
®
LM3S8962 Microcontroller
NRND: Not recommended for new designs.