Datasheet

DescriptionResetTypeNameBit/Field
Max ADC Speed
Indicates the maximum rate at which the ADC samples data.
DescriptionValue
500K samples/second0x2
0x2ROMAXADCSPD9:8
MPU Present
When set, indicates that the Cortex-M3 Memory Protection Unit (MPU)
module is present. See the "Cortex-M3 Peripherals" chapter in the
Stellaris Data Sheet for details on the MPU.
1ROMPU7
Hibernation Module Present
When set, indicates that the Hibernation module is present.
1ROHIB6
Temp Sensor Present
When set, indicates that the on-chip temperature sensor is present.
1ROTEMPSNS5
PLL Present
When set, indicates that the on-chip Phase Locked Loop (PLL) is
present.
1ROPLL4
Watchdog Timer Present
When set, indicates that a watchdog timer is present.
1ROWDT3
SWO Trace Port Present
When set, indicates that the Serial Wire Output (SWO) trace port is
present.
1ROSWO2
SWD Present
When set, indicates that the Serial Wire Debugger (SWD) is present.
1ROSWD1
JTAG Present
When set, indicates that the JTAG debugger interface is present.
1ROJTAG0
June 18, 2012210
Texas Instruments-Production Data
System Control
NRND: Not recommended for new designs.