Datasheet

Register 13: Interrupt 32-43 Active Bit (ACTIVE1), offset 0x304
Note: This register can only be accessed from privileged mode.
The ACTIVE1 register indicates which interrupts are active. Bit 0 corresponds to Interrupt 32; bit
11 corresponds to Interrupt 43. See Table 2-9 on page 86 for interrupt assignments.
Caution – Do not manually set or clear the bits in this register.
Interrupt 32-43 Active Bit (ACTIVE1)
Base 0xE000.E000
Offset 0x304
Type RO, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
INTreserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x0000.0ROreserved31:12
Interrupt Active
DescriptionValue
The corresponding interrupt is not active.0
The corresponding interrupt is active, or active and pending.1
0x000ROINT11:0
June 18, 2012122
Texas Instruments-Production Data
Cortex-M3 Peripherals
NRND: Not recommended for new designs.