Datasheet

DescriptionResetTypeNameBit/Field
Interrupt Enable
DescriptionValue
Interrupt generation is disabled. Software can use the
COUNT bit to determine if the counter has ever reached 0.
0
An interrupt is generated to the NVIC when SysTick counts
to 0.
1
0R/WINTEN1
Enable
DescriptionValue
The counter is disabled.0
Enables SysTick to operate in a multi-shot way. That is, the
counter loads the RELOAD value and begins counting down.
On reaching 0, the COUNT bit is set and an interrupt is
generated if enabled by INTEN. The counter then loads the
RELOAD value again and begins counting.
1
0R/WENABLE0
June 18, 2012110
Texas Instruments-Production Data
Cortex-M3 Peripherals
NRND: Not recommended for new designs.