Datasheet

USB Interface Board and I
2
C-Compatible Interface Program www.ti.com
The above image shows the default settings. “Strobe Enable” (bit7 in register 0x06) is set, so only STROBE operations are allowed in the default
settings. The “Simple I
2
C Interface” fields may be used to write or read any LM3565 register.
Figure 14. Simple I
2
C interface Fields
5.1 Current Set Register (0x02)
Use the dropdown menus to select the desirable flash current and torch current.
12
LM3565EVM User's Guide SNVU195A–FEBRUARY 2013–Revised MAY 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated