Datasheet

www.ti.com

LM3533 Graphical User Interface

7.3 Bank C, D, E, and F Tab

Each low voltage Control Bank (C, D, E, and F) has its own tab. Each tab has all the register options that

are unique to each of the low voltage control banks and the pattern generators. Table 16 through Table 24

describe these registers.

Figure 10. Low Voltage Control Bank Tab

Table 16. Bank (C/D/E/F) Configuration (0x1B, 0x1C, 0x1D, 0x1E), Bits[2:0]

Bit 2 Bits [1:0]

Mapping Mode Current Control

0 = Exponential Mapping (Default) 0X = Control Bank_ is configured for Brightness Register Current Control

via the respective Brightness Register (Default)

1 = Linear Mapping 10 = Control Bank_ is configured for ALS current control via the ALSM2

Zone Target Registers

11 = Control Bank_ is configured for ALS current control via the ALSM3

Zone Target Registers

SLOA172B–June 2012–Revised April 2013 AN-2250 LM3533 Evaluation Kit

Submit Documentation Feedback