Datasheet

LM150, LM350-N, LM350A
SNVS772B –MAY 1998–REVISED MARCH 2013 www.ti.com
Schematic Diagram
Figure 18. Schematic Diagram
Typical Applications
Full output current not available
at high input-output voltages.
†Optional—improves transient response. Output capacitors in the range of 1 μF to 1000 μF of aluminum or tantalum
electrolytic are commonly used to provide improved output impedance and rejection of transients.
*Needed if device is more than 6 inches from filter capacitors.
Figure 19. 1.2V–25V Adjustable Regulator
Note: Usually R1 = 240Ω for LM150 and R1 = 120Ω for LM350.
(3)
8 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM150 LM350-N LM350A