Datasheet

LM134, LM234, LM334
SNVS746C –MAY 2004–REVISED MARCH 2005 www.ti.com
Figure 9. Terminating Remote Sensor for Voltage Output
*Output impedance of the LM134 at the “R” pin is approximately
where R
2
is the equivalent external resistance connected from the V
−
pin to ground. This negative resistance can be
reduced by a factor of 5 or more by inserting an equivalent resistor R
3
= (R
2
/16) in series with the output.
Figure 10. Low Output Impedance Thermometer
Figure 11. Low Output Impedance Thermometer
10 Submit Documentation Feedback Copyright © 2004–2005, Texas Instruments Incorporated
Product Folder Links: LM134 LM234 LM334